Reverse Components Pimp My Ride

Chainring Single Bolt
1 x bolt/nut and 1 x washer (2,5mm).

• Features
  - Length: 7mm
  - Weight: 2g (+/- 5% weight tolerance)
  - Material: Aluminum 7075

  Chainring Bolt Set (4 pieces)
  The is a set of 4 pieces including 4 x 2,5 mm spacers.

  • Features
    - Length: 7 mm
    - Weight: 9 g (set 4 piece, +/- 5% weight tolerance)
    - Material: Aluminium 7075

Spare pins for your Reverse Pedals. Choose from the drop-down for the pins to suit your pedals. Below, each description correlating to the heading.

1. 12x Steel Pins US Size (Small 9mm) Escape Pro / Black One / Base
Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)

2. 12x Steel Pins US Size (Large 13mm) Escape Pro / Black One / Base
Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)

- Quantity: 12 pieces
- For: all Black One models / Escape Pro / Base Pedal
- Length: 13mm
- Thread: 10mm, type US-size ANSI 6-32
- Weight: 10g (+/- 5% weight tolerance)
- Material: Steel

3. 10x Steel Pins US Size (Medium 11mm) Escape Pro / Black One / Base

Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.

Attention!
Due to the production, there are colour deviations between the steel pins and the aluminium pins.

- Quantity: 10 pieces
- For: all Black One models / Escape Pro / Base Pedal
- Length: 11 mm
- Thread: 8 mm, type US-size ANSI 6-32
- Weight: 9 g (Set, +/- 5% weight tolerance)
- Material: Steel

 4. 42x Steel Pins US Size (Medium 11mm) Escape Pro / Black One / Base
Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)

 
5. 24x Alu Pins "10.9"
The reverse pedal pins are available as a set with 24 pieces and fit most standard pedals on the market

- Thread: M4 x 4mm
- Pin-Height: 5 mm
- Weight: 16 g (set, +/- 5% weight tolerance)
- Material: Steel

6. 32x Steel U-Pins Escape
You lost your pin? No problem!

- 32 Pins in one set
- For: Escape Pedal
- Ø-Head: 5.6 mm
- Length: 10 mm
- Weight: 26 g (+/- 5% weight tolerance)
- Material: Steel

7. 16x Alu R-Pins Escape / Escape Pro
You lost your pin? No problem!

- 16 Pins in set (M4)
- For: Escape, Escape Pro Pedal
- Weight: 6 g (set, +/- 5% weight tolerance)
- Material: Aluminium

8. 10x Alu Pins US Size (Medium 11mm) Escape Pro / Black One / Base

Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
The pins are also available individually!

With the IS-PM brake adapter you can mount any modern post-mount disc brake calliper to your IS mount.
Just choose the mount that coincides with your disc rotor size.

Add a little colour to your bike with Reverse Disc Rotor Bolts.

• - Torx T25 screws M5 x 10 mm
  - Weight: 26 g (+/- 5% weight tolerance)
  - Material: Steel S10B21 / class 10.9

Underrated but super important!
A strong end on the handlebar is so important because it protects both you and your handlebar in the event of a crash. The simple plastic end plugs used by the most manufacturers can get lost easily. That's why we use the Aluminium Chip Bar Ends on our grips.

As part of our lock on system, the bar ends always stay where they should be and effectively protect the handlebar from damage.

With the PM-PM brake adapter you can increase your disc size.
This means, if your Post Mount (PM) brake mount on the fork or frame is designed for a 160 mm brake disc, you can mount a 180 mm disc with the installed adapter.
The same applies to other disc sizes.

PM brake mount 160 mm + PM-PM +20mm adapter = brake disc size 180 mm
PM brake mount 180 mm + PM-PM +20mm adapter = brake disc size 200 mm
PM Brake mount 180 mm + PM-PM +20mm adapter + 2 spacers* = Brake disc size 203 mm (*With one spacer per mounting side with a thickness of 1.5 mm)
PM brake mount 200 mm + PM-PM +20mm adapter = brake disc size 220 mm
PM brake mount 203 mm + PM-PM +20mm adapter = brake disc size 223 mm

When using the PM-PM +20mm adapter, longer mounting bolts are required, which are not included and must be purchased separately. Item no. 01990

Beautifully simple top caps with Reverse logo. Supplied with colour-matching aluminium bolt.

- Screw: M6 x 32mm
- Weight: 8 g (+/- 5% weight tolerance)
- Material: Aluminium

Alloy cassette lock ring to fasten down any HG cassette.

 - Size: 31.8mm or 34.9 mm
- Allen screw: 5 mm
- Weight: 26 g (+/- 5% weight tolerance)
- Material: Aluminium 7075
- Max. torque: 6 - 8 NM

•  
  

  Features
  - Size: 140 mm, 160mm, 180mm, 203mm and 220mm
  - Mount: IS 6 bolt
  - Compatibility: No restrictions
  - Thickness: 1.80 mm (+/- 5 % production tolerance)
  - Weight: 140mm (100g), 160mm (137g) 180mm (144g) 203mm (202g)  220mm (210g)  (+/- 5% weight tolerance)
  - Material: Steel

  Extras
  - Laser engraved

Colour match your ride! Our 2 piece alloy / steel disc rotor gives you a ton of options for your custom build. Our high performance steel braking surface provides you the optimum brake power and the alloy spider keeps the weight low.
Available for all brake models.

• Features
  - Size: 160 mm
  - Wall thickness: 1.8 mm
  - Mount: IS 6 bolt
  - Compatibility: No restrictions
  - Thickness: 1.80 mm (+/- 5 % production tolerance)
  - Weight: 104 g (+/- 5% weight tolerance)
  - Material: Steel (Disc) / Aluminium (Star)

  Extras
  - Anodized and laser engraved

  •