Reverse Components Pedals

Maximum grip – light weight
These are the facts for our TITANIUM pedal of the Black ONE series.
The Black One TITANIUM pedal is 65 g lighter than our conventional Black One pedal and weighs just 249 g in pair. From the very beginning we designed this pedal to combine maximum durability and shape with the lowest possible weight.

This fully CNC machined pedal builds super flat to ensure maximum ground clearance when shredding through rough terrain. For the bearings we make no compromises and use german IGUS bushings and multi sealed industrial ball bearings! When taken out of the box, the pedal spins a bit slow, but this is how it is supposed to be. This prevents the pedal from spinning, if you have to get your foot off the pedal in tight switchback manoeuvres!

This pedal comes black in black, but if you like it a bit more colourful you can use the coloured pins of the standard Black ONE pedals as well! In addition to the standard aluminium pins, we also offer robust steel pins in different colours for this pedal.

• - Pedal size: 100 x 100 mm
  - Height: 15 mm
  - Pedal thread: 9/16"
  - Bearings: 1 x german IGUS DU bushing / 2 x industrial bearings
  - Pin height: 5 mm standover height
  - Pin Setup: 20 aluminium pins per pedal (Thread: US Size 6/32", Length: 11mm)
  - Weight: 249 g in pair (+/- 5% weight tolerance)
  - Material: Aluminium - super light weight (pedal) / titanium (axle)

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

• - Pedal service at the manufacturer (exchange of all bearings) for 25€ incl. return shipment within Germany
  - 1 x german IGUS DU bushing / 2 x industrial bearings
  - High strength titanium axle
  - 2x Pedal washers: to protect the crankset thread
  - Replaceable pins (4 replacement pins included, length 11mm)
  - Optional accessories available are aluminium or steel pins in various colours and lengths (click here)

Maximum grip – light weight
These are the key features of our Black ONE pedal. From the very beginning we designed this pedal to combine maximum durability and shape with the lowest possible weight. This fully CNC machined pedal builds super flat to ensure maximum ground clearance when shredding through rough terrain. For the bearings we make no compromises and use a combination of needle- and multi sealed ball bearings.

When taken out of the box, the pedal spins a bit slow, but this is how it is supposed to be. This prevents the pedal from spinning, if you have to get your foot off the pedal in tight switchback manoeuvres!

We offer our Black ONE pedal with different coloured pins to make the choice on the respective bike as individual as possible.
In addition to the standard aluminium pins, we also offer robust steel pins in different colours for this pedal.

- Pedal size: 100 x 100 mm
- Height: 15 mm
- Pedal thread: 9/16"
- Bearings: 1 x german IGUS DU Bushing / 2 x industrial bearings
- Pin height: 5 mm standover height
- Pin Setup: 20 aluminium pins per pedal (Thread: US Size 6/32", Length: 11mm)
- Weight: 309 g in pair (+/- 5% weight tolerance)
- Material: Aluminium - super light weight (pedal) / CrMo (axle)

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

Base Pedal - Grip it and rip it!

Big, wide and grippy. The Base is our latest pedal that combines our knowledge from almost 20 years of pedal manufacturing with a new technology to improve longevity:

The "Baurillium" bushing from Reverse.

Our newly developed "Baurillium" bushing ensures a long-lasting and low-maintenance pedal. The bushing replaces plastic or Teflon bushings with a special metal alloy with particularly effective sliding and lubricating properties. This bushing is significantly more resilient and has a long service life. A permanent lubrication is generated by the metal alloy with micro pores.

A large platform with an optimum concave keeps your foot firmly sitting into the pedal. This allows a direct feedback into the bike and stops any accidental foot slips.

Through the design stage we experimented with different shaped platforms and chose a slightly rounder edge-profile of the pedal body to deflect hits and to reduces getting hung up on roots or rocks.
The milled pedal body made of 6061-T6 aluminium with our proven CrMo steel axle makes for a super robust and reliable pedal.

The extra pronounced thread on the pins provides additional support and securely anchors your shoe sole to the pedal. Various pin lengths (9mm & 13mm) are optionally available as accessories to personalize the desired grip level.

Whether you’re hitting the steeps of Champery in the wet, big hucks in your local bike park, or taming fast, root infested natural trails, the Base keeps your feet glued to in place. 

A pedal you can rely on. From the inner workings to the pedal body, we've worked on every detail to make it the ultimate gravity-oriented flat pedal.

Ride Reverse

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

The classic flat pedal
Through its robustness and its countless colour variations, it is used and appreciated by mountain bikers worldwide. If you look around at your next visit to a European bike park you will certainly discover some ESCAPE pedals!

Our in house name for the Escape is "THE Bike Park Pedal" because it is almost impossible to crack the body of the pedal. We often get pedals for service on bearings and axle, where you can see the abuse over the years.

Despite countless contacts with stones and roots, the ESCAPE pedal remains sturdy and riders have had years of use of out pairs of these pedals. The combination of steel and aluminium pins, spread over a generous 10 cm by 10 cm pedal body, provides an incredibly good grip, as well as a safe stand on the pedal! Because this fact is just as important as the traction between the wheels and the ground.

Replaceable pins, the anti-rotate function” which prevents the pedal from spinning, if you have to get your foot off the pedal in tight switchback manoeuvres, the very fair price-performance ratio and not least huge colour variations contribute to the success of the ESCAPE pedal.

• - Pedal size: 100 x 100 mm
  - Height: 16 mm
  - Pedal thread: 9/16"
  - Bearings: 1 x industrial bearing / 1 x IGUS DU bushing
  - Pin Setup: 16 steel U-Pins (self-threatening, Length: 10mm) / 8 aluminium R-Pins (Thread: M4)
  - Pin height: 5 mm standover height
  - Weight: 405 g (+/- 5% weight tolerance)
  - Material: Aluminium 6061

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

• - Anti-rotate-function (the pedal does not rotate arbitrarily with tricks. Desired sluggishness)
  - All spare parts are available separately
  - Pedal service at the manufacturer (exchange of all bearings) for 25€ incl. return shipment within Germany
  - IGUS DU bushings and sealed industrial bearings
  - High strength CrMo axle
  - 2x Pedal washers: to protect the crankset thread
  - Replaceable pins (click here)

Unlike other components, there are no specific laws regarding pedals for E-Bikes. The excess loads and extended riding time which comes automatically when riding E-Bikes means that a stiffer, stronger pedal body will perform better and longer.

Rough and steep trails which only were accessible for one or two laps, get easy to master with the help of the engine support. With all these extra loads and riding time – it’s easy for the pedals to have some big knocks on the way. This can lead to nasty dents and damaged pedal bodies. Therefore we have strengthened our proven Escape pedal at the appropriate places to create even more strength.
Our E-Escape pedal was built for the toughest use.

The selected steel pins with their height of 5 mm offer a great stand and are extra robust! The design of the pins also avoids damage of the thread in the pedal body if worn out pins have to be changed.

- Pedal size: 100 x 100 mm
- Pedal height: 15 mm
- Pedal thread: 9/16"
- Bearings: 1 x industrial bearings / 1 x IGUS bushings
- Pin setup: 24 steel pins (Thread: M4)
- Pins height: 5 mm standover height
- Weight: 431 g pair (+/- 5% weight tolerance)
- Material: Aluminium (pedal) / CrMo (axle)

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

• - Pedal service at the manufacturer (exchange of all bearings) for 25€ incl. return shipment within Germany
  - Reinforced pedal body
  - Durable and easily exchangeable steel pins
  - Minimal height for maximum ground clearance
  - 2x Pedal washers (to protect the crankset thread)

With this pedal, we've worked to improve shredding for young riders, with better ergonomics to suit smaller feet. With kids bikes being lighter and more capable than ever, it's time to get the components to fit the smaller proportions that kids have.

In our opinion this topic gets too little attention by the bicycle industry. Be it with the Q-factor of the children's bicycles or the oversized pedal surface of the pedals for children's feet!

Both the Q-factor and the support surface of the shoe on the pedal body, were taken into consideration during the development of the Youngstar pedal. The extra-short pedal axle allows a significantly lower Q-factor, which stops the legs being forced into the bow legged "X-position".

This makes it much easier for the kids and leads to a more circular rotations. Due to the smaller pedal surface for kids feet, the pedal flipping is reduced. Imagine you have to stand on a pedal the size of an A4 sheet! You will definitely tip backwards or forwards, since you could never really stand on the middle of such a pedal! The Youngstar is much smaller, making it much easier to find the point of balance.
With its weight of just 229 g, this aluminium pedal pair with CrMo axle is tough, durable but will be lighter than most pedals out there.

Note:
Fits for children up to shoe size 34 (US size 3).

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

Our Escape Pro is based upon our legendary Escape pedal with an optimised weight saving design. The pedal body got design update and we managed to save some grams here and there. This pedal can handle all riding styles and features a high grade CrMo axle.

The Escape Pro features a carefully CNC machined aluminium body, paired up with a strong cromoly axle creating a light but solid performer, capable of long days climbing and descending the mountain, or smashing laps in the bikepark!

It's your choice.

- Pedal size: 100 x 100 mm
- Height: 15 mm
- Pedal thread: 9/16"
- Bearings: 1 x industrial bearing / 1 x IGUS DU bushing
- Pin Setup: 16 aluminium pins (Thread: US Size 6/32", Length: 11mm) / 8 aluminium R-Pins (Thread: M4)
- Pin height: 5 mm standover height
- Weight: 364 g in pair (+/- 5% weight tolerance)
- Material: Aluminium (pedal) CrMo (axle)

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

Optimum concave shaped flat pedal

The pedal surface helps your foot to be positioned on the pedal and generates additional grip. The noticeable negative curvature of the pedal surface literally gives you the feeling of standing "in" instead of "on" the pedal. You just have to try it to understand the feeling you have on this pedal!

The pedal comes with an assembly tool and five spare pins.

Safety note:
Unless otherwise specified by the crank manufacturer.
Make sure that the pedals are tightened to min. 37 to max. 42 Nm.

Spare pins for your Reverse Pedals. Choose from the drop-down for the pins to suit your pedals. Below, each description correlating to the heading.

1. 12x Steel Pins US Size (Small 9mm) Escape Pro / Black One / Base
Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)

2. 12x Steel Pins US Size (Large 13mm) Escape Pro / Black One / Base
Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)

- Quantity: 12 pieces
- For: all Black One models / Escape Pro / Base Pedal
- Length: 13mm
- Thread: 10mm, type US-size ANSI 6-32
- Weight: 10g (+/- 5% weight tolerance)
- Material: Steel

3. 10x Steel Pins US Size (Medium 11mm) Escape Pro / Black One / Base

Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.

Attention!
Due to the production, there are colour deviations between the steel pins and the aluminium pins.

- Quantity: 10 pieces
- For: all Black One models / Escape Pro / Base Pedal
- Length: 11 mm
- Thread: 8 mm, type US-size ANSI 6-32
- Weight: 9 g (Set, +/- 5% weight tolerance)
- Material: Steel

 4. 42x Steel Pins US Size (Medium 11mm) Escape Pro / Black One / Base
Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)

 
5. 24x Alu Pins "10.9"
The reverse pedal pins are available as a set with 24 pieces and fit most standard pedals on the market

- Thread: M4 x 4mm
- Pin-Height: 5 mm
- Weight: 16 g (set, +/- 5% weight tolerance)
- Material: Steel

6. 32x Steel U-Pins Escape
You lost your pin? No problem!

- 32 Pins in one set
- For: Escape Pedal
- Ø-Head: 5.6 mm
- Length: 10 mm
- Weight: 26 g (+/- 5% weight tolerance)
- Material: Steel

7. 16x Alu R-Pins Escape / Escape Pro
You lost your pin? No problem!

- 16 Pins in set (M4)
- For: Escape, Escape Pro Pedal
- Weight: 6 g (set, +/- 5% weight tolerance)
- Material: Aluminium

8. 10x Alu Pins US Size (Medium 11mm) Escape Pro / Black One / Base

Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.
The pins are also available individually!

Specially designed neoprene pedal covers to ensure scratch protection for other bikes, your house or the inside of your car when travelling. Quick to put on with easy Velcro closure.