Reverse Components Grips

The R-Shock was our first standard grip with our soft rubber compound and also the first specific "shock absorbing" grip. With the first test rides of the prototypes we were sure that we are on the right direction with this grip! The feedback from the community and our factory riders gave us the certainty to include this grip in our program.

A slim shape provides good control at a reasonably narrow width, whilst providing incredible damping characteristics.
Like our Classic, the R-Shock is a true all-rounder that feels home in all disciplines from XC to Downhill.

CLICK FOR SIZE GUIDE

Due to its special stamped grip pattern, this grip got its name.
This grip pattern offers an optimal combination of grip and vibration damping.
This version of the Stamp dispenses with our lock on system and is therefore offers excellent value for money.

CLICK FOR SIZE GUIDE

Due to its special stamped grip pattern, this grip got its name. This grip structure offers perfect combination of grip and vibration damping. Most of our World Cup DH riders use this grip! Whether during training runs, qualifying or in the race itself…
The Stamp offers a good mix of grip, damping and feedback!

CLICK FOR SIZE GUIDE

The special ribbed structure of the grip allows your fingers to always position correctly and thus always have control over your handlebar! With its special rubber compound, the grip offers excellent damping comfort, without being too soft.
Whether in the bike park or on your home trails, this grip always gives you the perfect combination of feedback, control and durability.

CLICK FOR SIZE GUIDE

As the name implies, the classic among the reverse handles!
It all started with this grip. Our very first grip model is still one of our most popular items today. This was one of the first MTB grips on the market which was available in different sizes.

Due to its diamond grip pattern and the damping rubber compound, this grip suits for all disciplines. Equipped with 2 aluminium clamp rings, it always stays in its position and provides perfect grip and control on the handlebars. The aluminium Chip Bar-Ends withstand even the toughest demands and protect the handlebar end permanently!

The Classic Lock On is available in 3 different grip diameters and many different colour combinations.

- Grip pattern: Reverse diamond knobs
- Outer diameter: Ø 28 mm / 29mm / 31mm (select)
- Inner diameter: Ø 22.2 mm (standard diameter of handlebar end)
- Will fit all standard handlebars on the market
- Width: 130 mm
- Weight: 109 g (+/- 5% weight tolerance)
- Material: Reverse medium compound / aluminium (lock rings + chip bar-ends)

CLICK FOR SIZE GUIDE

Longer rides and bigger adventures can equal greater strain on the hands and wrists. Our special silicone foam blend absorbs shock much better than conventional grips and offers maximum comfort. The super soft and UV resistant silicone foam compound is exclusively produced for Reverse Components and makes the ride not only smoother and reduces hard feedback of the handlebar. It also gives you extraordinary grip in wet conditions. These grips are very comfortable if you are riding without gloves and give the hand a huge contact surface.
 
The extra reinforced aluminium bar ends also protect the handlebar if the bike is dropped to the ground.   

Longer rides and bigger adventures can equal greater strain on the hands and wrists. Our special silicone foam blend absorbs shock much better than conventional grips and offers maximum comfort. The super soft and UV resistant silicone foam compound is exclusively produced for Reverse Components and makes the ride not only smoother and reduces hard feedback of the handlebar. It also gives you extraordinary grip in wet conditions. These grips are very comfortable if you are riding without gloves and give the hand a huge contact surface.
 
The extra reinforced aluminium bar ends also protect the handlebar if the bike is dropped to the ground.   

Grips that fit like a glove. The ergonomic design tapers from a 34 mm diameter at the inner clamp to 30 mm at the bar end, relieving pressure at the 4th and 5th fingers and the outer palm, allowing more control and less fatigue. Tested by our Downhill riders, they requested the Taper grips to be put into production due to the increased ability to do more runs with less fatigue!  The ribbed grip pattern and rubber compound gives good vibration damping qualities, increasing the smooth ride.

The first contact point of any bike is the grips. With children having smaller hands than adults, this contact point is even more important to get right to allow good control of the bike. The common problem is that children s bikes are equipped with grips that have too large a diameter. This is why we developed the Youngstar grip, to make the perfect match for young riders.

With a diameter of 28 mm and a total length of 98 mm this handle offers the same comfort as our adult handles, at a size that sits comfortably in their hand. The Youngstar grip is available with different clamp ring colors to suit any colour scheme.

Safety for young riders is our top priority. To prevent falls due to slipping off the grips, for the Youngstar grips we opted for a very soft rubber compound, which provides a much higher grip level and great damping properties. With the Youngstar grips, the young riders have excellent grip in all situations and less hand soreness, giving them more confidence on the bike and a willingness to ride further! Due to the softness of the rubber compound, like a good tire, there is faster wear than in comparable grips with a harder rubber compound, but which offer significantly less grip and damping. In addition, there is the possibility, after wearing out the top side of the grip, the grip can be rotated 180 degrees, so that the grips can be used for a while longer.

Designed and tested by us, the Stamp single lock on grip is the ultimate blend, if comfort and control are your main focus. With a single inner lock on grip, it keeps the outer edge of the bar soft and comfortable for riders who like to hang their hands right on the edge of the bar. To avoid damage to the vulnerable end of the grip, we have strengthened the inner part with reinforced plastic for when the bike is leaned against walls or hits the ground.

With its 30 mm diameter the grip sits in the middle of the range as a good all-rounder for all riders and disciplines for XC to DH. For the Stamp Single lock-on grip we use our soft and shock absorbing "Medium compound" rubber.

The NICO VINK SIGNATURE grips were built according to Nico's specifications.

Nico knows exactly what he wants and puts value on reliability, and perfect control over his handlebars. The special lamellar structure of the grip allows your fingers to always position correctly and thus always have control of your handlebar!
Whether at Rampage, Darkfest, Chatel or on his home trails, this grip gives Nico the perfect combination of feedback, control and durability.

"What I like most about this grip is that it always does what it should!
Perfect grip, feedback and damping even when it's hard and rough.
The width and the diameter fit perfectly to my hands and the Lock Rings with the Chip Bar Ends have taken any abuse I put onto them so far! "

- Grip pattern: Reverse lamellar
- Outer diameter: Ø 30 mm
- Inner diameter: Ø 22.2 mm (standard diameter of handlebar end)
- Will fit all standard handlebars on the market
- Width: 130 mm
- Weight: 109 g (+/- 5% weight tolerance)
- Material: Reverse standard compound / aluminium (lock rings + chip bar-ends)
- Reverse Lock On / Chip Bar-Ends with Nico Vink logo

Find the Right Grip - CLICK HERE

The Booster Single Lock-On grip is the ultimate blend, if comfort and control are your main focus. With a single inner lock on grip, it keeps the outer edge of the bar soft and comfortable for riders who like to hang their hands right on the edge of the bar. To avoid damage to the vulnerable end of the grip, we have strengthened the inner part with reinforced plastic for when the bike is leaned against walls or hits the ground.

With its 31mm diameter the grip sits in the middle of the range as a good all-rounder for all riders and disciplines for XC to DH. For the Booster Single Lock-On grip we use our soft and shock absorbing "Medium compound" rubber.

- Grip pattern: Reverse booster
- Outer diameter: Ø 31 mm
- Inner diameter: Ø 22.2 mm (standard diameter of handlebar end)
- Will fit all standard handlebars on the market
- Length: 130 mm
- Weight: 116 g (+/- 5% weight tolerance)
- Material: Reverse Medium compound / aluminium (lock rings) / Plastic (Bar End Plugs)

Find the Right Grip - CLICK HERE