When you've spent £50 on your race ticket and your tyre just won't seal! Or you've not checked your sealant levels for a while and you tyre is as dry as a desert when you flat at your favourite trail centre. GUP will get you rolling...fast!
GÜP is formulated to mix with other latex-based sealants, meaning if you need a top up and an injection of air, GUP works.
GUP will fix tyres with inner tubes as well as tubeless and tubular systems. You can add tubeless sealant to your inner tubes with ease!
GÜP inflates a 29" x 2.4" tyre to 29psi or 700c tyre to 90-110psi!
GÜP Works with Presta and Schraeder valves without an adapter
GUP mixes well with other Latex-Based tubeless sealants
GÜP will seal holes in tubeless, tubular and inner-tubed tyres
Comes as a single can. GÜP Industries Holster sold separately or add it with the options below.
How to use GUP Industries successfully.
Give the can a really quick shake
Support the wheel/bike between your legs with the valve at the top of the wheel.
Place can over the valve.DO NOTpush can all the way up against the rim.
With one hand, push can up towards the rim whilesimultaneously pinching the yellow head and pushing down towards the can with the other hand. This is a two-hand job. DO NOTuse the rim to push the head towards the can.The yellow cap should not be pushed against the rim.
Hear the can expel sealant and air into your tyre. Hold until desired pressure is reached.
As you can tell, it's pretty easy, but we just want to make sure the can is not pushed hard all the way up the valve and against the rim. Why? The can needs free-flow of air so the air and sealant can travel into the valve swiftly. By pushing the can all the way up the valve to the rim, you block the valve itself causing a build up of pressure behind the yellow rubber top. It will then pop off and a bit of sealant will foam out. If this happens, wipe away and try again using the above instructions.
UK ONLY - SORRY, these can only currently be shipped within the United Kingdom because of their pressurised nature.
Fix Mfg Wheelie Wrench Pro Hans Rey Edition
Regular price£ 74.99 GBP
The incredible Wheelie Wrench Pro, but with the benefit of a Dynaplug tubeless repair kit and Hans Rey branded neoprene carry pouch. It's called the Hans Rey edition.
Stainless Dynaplug threaded carrier
3x Dyna Plug, brass-tipped tyre plugs
Neoprene Hans Rey Pouch
Wheelie Wrench Pro tool
Tubeless hop-up kit also available to add Dyna Plug to your existing Wheelie Wrench Pro.
The Wheelie Wrench Pro™ is a combination of compact size packed with plenty of features. Special design consideration was given to common concerns with modern bikes and components. Ever had your presta valve glued shut with sealant? Repairing your 11-speed chain trailside? Bent rotor? This tool does it all. If you’ve updated your bike lately, be sure to update your multi tool with the Wheelie Wrench Pro™. Be sure to carry it with one of our Payload Pocket™ solutions.
Compatible with our Payload Pocket carry solutions*
Aluminum and CR-V steel alloy construction
2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm hex wrench
Phillips screwdriver doubles as slotted screwdriver
8mm and 10mm open ended wrench
Rotor straightener for minor bends
Includes 11-speed quick links (SRAM or Shimano compatible). Accepts other 10 or 12spd links.
Presta valve core remover
Stuck presta valve stem opener
Chain breaker for 10-speed and greater
#0 and #2 spoke wrenches
Tool splits in two and transforms into a long wrench handle
Dyna Plug tubeless plug tool
3x Dyna Plug brass-tipped tyre plugs
Neoprene Hans Rey carry pouch
Fix Mfg Hans Rey Edition Dynaplug Kit
Regular price£ 24.99 GBP
This is the Dynaplug Hop-Up kit for the Wheelie Wrench Pro tool*.
Stainless Dynaplug threaded carrier for use in conjunction with the Wheelie Wrench Pro tool
3x Dynaplug, brass-tipped tyre plugs (widely available in bike shops)