Reverse Components Hubs

Different spokes Lengths and spokes Angle between the drive and brake side of the hub is one of the biggest weaknesses of wheels, as the flange distances are asymmetrical to the hub center.

Our EFS system (Equal Flange System) has symmetrical flange spacings and therefore also allows symmetrical spoke angles. Since the same spoke length is used on both flange sides, exactly the same spoke tension can be generated on both sides. As a result, this leads to an extremely stable and physically optimal impeller.

- 150/12 mm
- Number of holes: 32
- 120 points of engagement
- Weight: 305 g (+/- 5% weight tolerance)
- Material: Aluminum
- Only 7-speed compatible

- EFS = Equal Flange System
- Symmetrical flange distances for symmetrical spoke angles

Spoking data:
Flange to Center dimension:
- Left (Brake disc side): 37mm
- Right (Drive side): 37mm

Flange circle diameter.
- Left (Brake disc side): 58mm
- Right (Drive side): 58mm

Spoke hole dimension.
- 2.5 mm

We use the Anti-Bite freewheel body technology on our EVO-10 rear hub. With its 3 "steel blades" the Anti-Bite system prevents a "stuck" of the cassette.

Modern 1-by drivetrains use cassettes with huge transmission bandwidths and work with great force on the aluminium freewheel body. This often leads to the cassette being difficult to loosen if it has to be exchanged. To prevent this, the anti-bite technology is used!

The 4 multi-sealed industrial bearings and the 6 built-pawls guarantee long performance and low maintenance costs.

- 150/12 mm
- Number of holes: 32
- 60 points of engagement
- Weight: 291g (+/- 5% weight tolerance)
- Material: Aluminium (hub and freehub body) / steel (anti-bite blades)
- Freewheel: Shimano

The super lightweight reverse Reverse Base hub is suitable for all axle diameters thanks to the 2 in 1 system. Whether 135/12 mm and 10 mm or optional 142/12 mm thru axle, with the Reverse Adapter / Axle Kits (Optionally available) you can use the wheelset in every bike.

With 4 multi-sealed industrial bearings to protect against dust and dirt, this hub guarantees long-lasting pleasure.

- 135/12 mm Standard, 135/10 mm with Adapter: 40145 or 142/12 mm with Axle: 20038 / 20039
- Holes: 32
- 4 sealed bearings (Hub body: 2x 6902 2RS Freewheel: 2x 15267 2RS)
- 6 pawls
- Weight: 297 g (+/- 5% weight tolerance)
- Material: Aluminium
- Freewheel: SRAM XD

Spoking data:
Flange to Center dimension:
- Left (Brake disc side): 36mm
- Right (Drive side): 19mm

Flange circle diameter.
- Left (Brake disc side): 58mm
- Right (Drive side): 58mm

Spoke hole dimension.
- 2.5 mm

We built this hub for all owners of the Lefty Supermax fork. Should the Cannondale hub be worn or damaged, it will be very difficult to find a replacement. But the search comes to an end with our EVO-10 Supermax hub. Two multi-sealed industrial bearings are installed in the hub body.

- Number of holes: 32
- Weight: 125 g (+/- 5% weight tolerance)
- Material: Aluminium
- For Lefty Supermax forks

Our BASE series is about high performance, bullet-proof durability and simplicity.
The singlespeed hub is ideal for your park/dirt jump/slopestyle or fixie style bike. It s built for riders looking for more riding time and less maintenance.
With 4 Industrial bearings and a 13T cog as standard, (9T - 10T - 11T - 12T driver and sprocket also available), it is purpose built to create a durable setup that can spin for a long time. 

- 135/10 mm
- Holes: 32
- 4 sealed bearings (4 x 6902 2RS)
- 6 pawls
- The sprocket of the hub on the freewheel is permanently installed.
- 25 points of engagement.
- 1 by 10-speed chains
- 13 T sprockets (Optionally you can buy 9T / 10T / 11T and 12T freewheel including sprockets)
- Weight: 358g (+/- 5% weight tolerance)
- Material: Aluminium
- Maximum screw tightening torque 40 Nm

Spoking data:
Flange to Center dimension:
- Left (Brake disc side): 34mm
- Right (Drive side): 36mm

Flange circle diameter.
- Left (Brake disc side): 58mm
- Right (Drive side): 58mm

Spoke hole dimension.
- 2.5 mm

The super lightweight Base Boost front hub is designed for any purpose.
Their robust design and 2 multi-sealed industrial bearings guarantee long performance and low maintenance costs.

Spoking data:
Flange to Center dimension:
- Left (Brake disc side): 26mm
- Right (Drive side): 41mm

Flange circle diameter.
- Left (Brake disc side): 58mm
- Right (Drive side): 47mm

Spoke hole dimension.
- 2.5 mm

The super lightweight Base Boost front hub is designed for any purpose.
Their robust design and 2 multi-sealed industrial bearings guarantee long performance and low maintenance costs.

- 110/15 mm
- Holes: 32
- 2 sealed bearings (6902 2RS)
- Weight: 143 g (+/- 5% weight tolerance)
- Material: Aluminium

Spoking data:
Flange to Center dimension:
- Left (Brake disc side): 26mm
- Right (Drive side): 41mm

Flange circle diameter.
- Left (Brake disc side): 58mm
- Right (Drive side): 45mm

Spoke hole dimension.
- 2.5 mm

The Base Front hub is fully convertible from 5mm QR, 9mm or 15mm thru axle due to our conversion kits.

The hub is delivered with the 200mm adapter.

The high quality sealed bearings will guarantee super smooth, fast rolling speed and longevity.

- 4 in 1 System (20x110mm/ 5x100mm/ 9x100mm/ 15x100mm) (No boost standard)
- Holes: 32
- 2 sealed bearings (6804 2RS)
- Weight: 186 g (+/- 5% weight tolerance)
- Material Aluminum

Spoking data:
Flange to Center dimension:
- Left (Brake disc side): 21mm
- Right (Drive side): 37mm

Flange circle diameter.
- Left (Brake disc side): 58mm
- Right (Drive side): 58mm

Spoke hole dimension.
- 2.5 mm

Reverse 2 in 1 System. All 157/12 hubs can be used for 148/12.

Adapterset for EVO 10 FR hub!

Set for widening a classic hub (100x15) to the Boost standard (110x15).

The set includes two spacers of 5 mm each to widen the axle, a 5 mm adapter plate for the brake disc and 6 long brake disc bolts (M5x15).

Set for widening a classic hub (142x12) to the Boost standard (148x12).

The set includes two spacers of 3 mm each to widen the axle, a 3 mm adapter plate for the brake disc and 6 long brake disc bolts (M5x15).

Axle-End-Cap for our EFS 7-Speed hub system for 157mm width.

Axle-End-Cap for our EFS 7-Speed hub system for 150mm width.

Endcap-Set for Base SingleSpeed hub!

Adapterset 20mm for Base VR 32H Multi-Use Hub

Adapterset 15mm for Base VR 32H Multi-Use Hub

Adapterset 9mm for Base VR 32H Multi-Use Hub

Adapter set 5mm for Base VR 32H Multi-Use Hub

This adapter is needed if you want to convert your Base HR hub with Shimano HG or SRAM XD freehub body to Shimano Micro Spline.