Reverse Components Chain Guides

We have reworked our popular X1-B chain guide and created a modular design with more options. The new open design allows you to mount the guide without taking off the crank. The Transformer bashguard can handle two positions depending on your used chainring size.
High position up to 34T - low position up to 38T.

• Features
  - Mount: ISCG 05
  - Size: 28-34T or 36-38T
  - Weight: 165 g with Taco (+/- 5% weight tolerance)
  - Finish: Anodized
  - Taco: Yes
  - Material: Aluminium 6061-T6

  Extras
  - For use in high and low position

  • 
    

No matter how you want your drivetrain to be setup, the Transformer guide can make sure you are covered. The three-part construction allows the bashguards to adapt to the size of the chainring. The upper chain guide can also be mounted without the lower part of the chain guide for a more minimalist setup.

All parts are, of course, sold separately - allowing you to buy the parts you need and add extra security if necessary. The Transformer bashguard can handle two positions depend on your used chainring size.
High position 28 - 34T - low position 36 to 38T.

• Features
  - Mount: ISCG 05
  - Size: 28-34T or 36-38T
  - Weight: 110 g with Taco (+/- 5% weight tolerance)
  - Finish: Anodized
  - Taco: Yes
  - Material: Aluminium 6061-T6

  Extras
  - For use in high and low position

  • 
    

Like our X1 Chain Guide except already with our Aluminium Bash Guard to prevent the chain ring from ground contact.

• Features
  - For 32-38T
  - Weight: 177 g with bashguard (+/- 5% weight tolerance)
  - Exchangeable bashguard
  - Pully with Industry bearing
  - Optional avaliable BB mount adapter
  - ISCG & ISCG 05
  - "Low Profile" design for maximum ground clearance
  - Material: Aluminium (plate & bashring)

Modern drivetrains are nowadays close to perfection and our chain guide is designed to work perfectly with the new clutch derailleurs. Super lightweight design and DH World Cup proven. Inspired by the best riders and made for the fastest riders. Our World Cup Chain device.

• Features
  - Mount: ISCG 05
  - Size: 28-36T
  - Weight: 79 g (+/- 5% weight tolerance)
  - Finish: Anodized
  - Taco: Yes
  - Materia: Aluminium 7075 T6

  Extras
  - Made for modern clutch drivetrains

Modern drivetrains are nowadays close to perfection and our chain guide is designed to work perfectly with the new clutch derailleurs. Super lightweight design and DH World Cup proven. Inspired by the best riders and made for the fastest riders. Our World Cup Chain device.

• Features
  - Mount: ISCG
  - Size: 28-36T
  - Weight: 103 g with Taco (+/- 5% weight tolerance)
  - Finish: Anodized
  - Taco: Yes
  - Material: Aluminium 7075 T6

  Extras
  - Made for modern clutch drivetrains

No matter how you want your drivetrain to be setup, the Transformer guide can make sure you are covered. The three-part construction allows the bashguards to adapt to the size of the chainring. The upper chain guide can also be mounted without the lower part of the chain guide for a more minimalist setup.

All parts are, of course, sold separately - allowing you to buy the parts you need and add extra security if necessary. The Transformer bashguard can handle two positions depend on your used chainring size.
High position 28 - 34T - Low position 36 to 38T.

Features
- Mount: ISCG 05
- Size: 28-34T or 36-38T
- Weight: 74 g incl. mountinghardware (+/- 5% weight tolerance)
- Finish: Anodized
- Taco: Yes
- Material: Aluminium 6061-T6

Extras
- For use in high and low position

Classic DH chain guide with extra low profile design for maximum ground clearance.

• Features
  - For 32-38T
  - Weight: 180 g (+/- 5% weight tolerance)
  - Exchangeable bashguard (not included in the delivery)
  - Pully with industry bearing
  - Optional avaliable BB mount adapter
  - ISCG & ISCG 05
  - "Low Profile" design for maximum ground clearance
  - Material: Aluminium (plate)

• Our taco is made from a high grade alloy to handle multiple impacts.

  • Features
    - Weight: 24 g (+/- 5% weight tolerance)
    - Material: Aluminium

• Features
  - Weight: 28 g (+/- 5% weight tolerance)
  - Material: Aluminium

No matter how you want your drivetrain to be setup, the Transformer guide can make sure you are covered. The three-part construction allows the bashguards to adapt to the size of the chainring. The upper chain guide can also be mounted without the lower part of the chain guide for a more minimalist setup.

All parts are, of course, sold separately - allowing you to buy the parts you need and add extra security if necessary. The Transformer bashguard can handle two positions depend on your used chainring size.
High position 28 - 34T - Low position 36 to 38T.

• Features
  - Mount: ISCG 05
  - Size: 28-38T
  - Weight: 58 g
  - Finish: Anodized
  - Material: Aluminium 6061-T6

  Extras
  - For use in high and low position

For bashguard X1 32-38T.

• Features
  - Weight: 51 g (+/- 5% weight tolerance)
  - Material: Aluminium

No more dropped chains. The Flip guide is our latest chainguide solution which allows the user to make quick adjustments and "flip" the guide out of the way by hand when removing the crank.
By hand, you can flip the upper guide out of the way and into the "service" position for easy chain cleaning and crank removal if necessary. When done, flip it back down into the "riding" position and it will firmly lock into place, keeping the chain secure on the roughest of tracks!

For secondary adjustments, the Flip guide has a clever spring loaded micro adjustment system allows fine tuning of the top guide via the allen bolt to get it sitting within the chain line perfectly - simply thread in to bring closer or thread out to move it further away.

• Features
  - For Shimano Steps 7000 - 8000 & EP8 Engines
  - Weight: 49 g (+/- 5% weight tolerance)
  - Material: Steel
  - Easy installation without removing your crank
  - Micro adjustment system for fine tuning
  - Compatible with 26t-36t Chainrings
  - Single tool install and adjustment
  - Boost chainring compatible
  - Oval chainring Compatible

No more dropped chains. The Flip guide is our latest chainguide solution which allows the user to make quick adjustments and "flip" the guide out of the way by hand when removing the crank.
By hand, you can flip the upper guide out of the way and into the "service" position for easy chain cleaning and crank removal if necessary. When done, flip it back down into the "riding" position and it will firmly lock into place, keeping the chain secure on the roughest of tracks!

For secondary adjustments, the Flip guide has a clever spring loaded micro adjustment system allows fine tuning of the top guide via the allen bolt to get it sitting within the chain line perfectly - simply thread in to bring closer or thread out to move it further away.

• Features
  - For Bosch Gen4 for Engines
  - Weight: 49 g (+/- 5% weight tolerance)
  - Material: Steel
  - Easy installation without removing your crank
  - Micro adjustment system for fine tuning
  - Compatible with 26t-36t Chainrings
  - Single tool install and adjustment
  - Boost chainring compatible
  - Oval chainring Compatible

No more dropped chains. The Flip guide is our latest chainguide solution which allows the user to make quick adjustments and "flip" the guide out of the way by hand when removing the crank.
By hand, you can flip the upper guide out of the way and into the "service" position for easy chain cleaning and crank removal if necessary. When done, flip it back down into the "riding" position and it will firmly lock into place, keeping the chain secure on the roughest of tracks!

For secondary adjustments, the Flip guide has a clever spring loaded micro adjustment system allows fine tuning of the top guide via the allen bolt to get it sitting within the chain line perfectly - simply thread in to bring closer or thread out to move it further away.

• Features
  - For ISCG 05 mount
  - Weight: 42 g (+/- 5% weight tolerance)
  - Material: Steel
  - Easy installation without removing your crank
  - Micro adjustment system for fine tuning
  - Compatible with 26t-36t Chainrings
  - Single tool install and adjustment
  - Boost chainring compatible
  - Oval chainring Compatible

No more dropped chains. The Flip guide is our latest chainguide solution which allows the user to make quick adjustments and "flip" the guide out of the way by hand when removing the crank.
By hand, you can flip the upper guide out of the way and into the "service" position for easy chain cleaning and crank removal if necessary. When done, flip it back down into the "riding" position and it will firmly lock into place, keeping the chain secure on the roughest of tracks!

For secondary adjustments, the Flip guide has a clever spring loaded micro adjustment system allows fine tuning of the top guide via the allen bolt to get it sitting within the chain line perfectly - simply thread in to bring closer or thread out to move it further away.

• FEATURES
  - For Direct Mount Mount
  - Weight: 29 g (+/- 5% weight tolerance)
  - Material: Plastic
  - Easy installation without removing your crank
  - Micro adjustment system for fine tuning
  - Single tool install and adjustment
  - Boost chainring compatible
  - Oval chainring Compatible

• For the Reverse X1 chain guide.

  • 
    

  • Features
    - Weight: 31 g (+/- 5% weight tolerance)

• For the Reverse X1 chain guide.
  

  •  

    Features
    Weight: 60 g (+/- 5% weight tolerance)

    • 
      

Reverse Chain Tensioner
Less complication = More riding time!

That was the aim with our SB One collab chain tensioner. Bikepark laps, freeride lines and gravity focused riders often don t need the complexity of a vulnerable rear derailleur setup. Our chain tensioner, in combnation with our singlespeed kit means you can keep it simple, quiet and hassle free all season long. No more waiting at the bike shop while your friends are back on the chairlift for another lap!
The chain tensioner screws into your rear derailleur hanger and the chain runs through the jockey wheels, providing a tight, smooth, secure setup.

Note:
Shorten the chain in a way that the rear suspension travel is completely available and cannot be blocked by the end stop of the chain tensioner!

Spare Parts:
Pulley set (part-no.: 90511)
Derailleur hanger screw (part-no.: 40269)

• Features
  - Material: aluminium
  - Weight: 146 g (+/- 5 % weight tolerance)
  - Sprocket Sizes: 11, 11 tooth
  - Chainline Adjustment: With the supplied washers
  - Compatibility: with 9/10/11spd chains and 13 - 17T sprockets

  Extras
  - Simple mounting on the shift lug.
  - Steplessly adjustable alignment to pinion by means of washers.
  - Easy mounting on the shift lug.
  - Manual

  Derailleur Hanger Screw For Colab Chain Tensioner
  Screw for attaching the Colab chain tensioner to the derailleur hanger.
  Features
  - Compatibility: Colab chain tensioner (part-no. 40221)
  - Weight: 15 g (+/- 5 % weight tolerance)
  - Size: M10x20 mm
  - Material: Stainless steel

  Pulley Set For Colab Chain Tensioner
  The pulley spare parts set for your Colab Chain Tensioner.
  For replacing damaged or worn out pulleys. The set contains one upper and one lower pulley.
  Features
  - Compatibility: with 9/10/11spd chains and 13 - 17T sprockets
  - Weight: 24 g (+/- 5 % weight tolerance)
  - Sprocket Sizes: 11, 11 tooth
  - Industrial bearing
  - Material: plastic / aluminium

• To assemble the ISCG-05 chain guide to a frame without ISCG-05.
  

  •  Features
    - Weight: 40 g (+/- 5% weight tolerance)
    - Material: Aluminium

• For the Reverse X1 chain guide.

  • 
    

  • Features
    - Weight: 33 g (+/- 5% weight tolerance)